Kevin MassenburgDay ago

That's a sweet build👀👏BOOM!

Stephen Harrison4 days ago

The nice sugar correlatively whistle because maraca structurally plug as a young lute. wonderful, decisive quill

HELLAxTTV4 days ago

More of these videossss

b y5 days ago

How did you do the fender flares? They look similar to the ones on the Yellow Banana..

Jeriel York6 days ago

I really appreciate your bills and your conversations you guys are not cussing like some people do thanks

b y7 days ago

Can you post info on axles (front & rear), transfer case, gear-ratio? Were the link tabs (1/4" thick?) bought from suppliers? What suppliers did you use for the links (tubes & ends)? Did you use link calculator to set things up front & rear? It's a 4-link rear, 3-link front? What rear coils did you use? What do you expect the overall weight to be?

Beardo McWhatTheFug7 days ago

I like those hats yall got.

Steven Foust7 days ago

Probably could have built a kick ass Cherokee faster, but that is looking pretty awesome

Jim Williamson8 days ago

You already got a banana, is this one the " punkin "

Systems Planet8 days ago

Why don't you build a transformer?

Ailsa Ni8 days ago

whomever the first person is who gets rescued by the new vehicle should get a new "Launch Edition version" of the I made a call t-shirt!

Jacob Lange8 days ago

That tribute segment was so moving.

Greg Ballard8 days ago

I must say Ive never seen sound / heat mat installed on the ext of a vehicle . Never say never.

Dave Cook8 days ago

5 minute drive to the Costa Vida :)

Harry N8 days ago

I think Trevor just named it... The Yellow Canary! You know, beacuse its tiny and yellow like a canary ...

Michael Hoffman9 days ago

In the video when you were installing the front suspension. You kept calling them "Ories." They are O.R.I.'s like the individual letters, not a word. They are really bad add. BTW, the make a reservoir O.R.I. as well and it adds 3 stages of damping. It makes them perform like a 5 way By-pass with internal bump stop. They also make an upgrade kit to add the reservoir to the regular model. If I were you, I would do the O.R.I. struts in the rear as well, and when you do the upper mounts do them up higher so you can run a longer version. You want to run them at 50% of the stroke when it's just sitting there. So it can go up or down the same amount of travel. You don't need the reservoir version unless you plan to go hitting the whoops and really going out and rallying it. If you are then I would definitely do the reservoir front and rear cause not only do they keep the oil separated from the nitrogen, but the reservoir adds 2 more stages to the dampening for a total of 5 stages! They act like a coilover, reservoir shock, 5way bypass shock, sway bar, limit straps and bump stop all in one unit! Anyway, awesome build man! Can't wait to see the videos of you out wheeling it!

Weslee Miller9 days ago

Sweet.

Weslee Miller9 days ago

Cool.

Weslee Miller9 days ago

Great video.

Warrior Woodworking9 days ago

You should spray in some LizardSkin sound deadening coating on the passenger compartment walls.

Thomas9 days ago

MATT OR RUDY!!! Was wondering if either of you had ever pondered having a roof rack on your corvair build that you could place camera mounts.. having so much success with U-Tube videos,,,permanently having quick release mounts might expedite capturing video... Just a thought!!! Your fan Tc from Nevada

D Roy9 days ago

Woah... They let you all go into that restaurant without masks?

NIGHT_SHADE19 days ago

nice masks

Kathy Armstrong9 days ago

Matt struggles to remember the ferrule nut before flaring the tubing, I feel for ya, don't know how many times I've soldered a wire connection only to realize I've forgotten the shrink tubing, Doh!

Nick Davidson9 days ago

I love the new wagon build. I get so excited everytime u upload a new video bout it. Can't wait to see its first recovery

Tom Chrissy9 days ago

Man, I love your video's, but quit trying to pay for all of your projects with ad's, you have increased them to amount where myself, and others will find a different channel to watch instead

Mark Blanchard10 days ago

With all your video and really enjoy, but it's hard to see the no masks in a public fast food restaurant.

Luiz Ferreira10 days ago

@ 7:22 does your ‘eyechrometer’ need calibrating at the opticians? 😊

Fadi Sayed10 days ago

🙏🙏👍👍

xjesse92x10 days ago

had I know this was an ls when youtube recommended it

nieooj gotoy10 days ago

I see you out there with that "goodnight - good morning" transition

Tom Holgate10 days ago

Did this Yank Tank get named officially yet? Love the build.

Myco Night10 days ago

I have Never been impressed by a Corvair, I have seen some decent ones, but you guys have the coolest one By Far. In a car show, I would stop and give extra attention to the on y'all built, but to see one doing recovery, and being used.... stop the bus, I just soiled my Jean's! Great Job, you nailed this build in every way, and deserve more then what's coming! And to add, you are using demo derby stuff, as proof of toughness, Y'all just had a grade school kid dunk on Shaq, kinda moment....LMAO

Joesep Spindle10 days ago

Mattracks: they would be good for snow and that brown powder you call sand (holy crap that stuff is bad where you are) have you given them any thought? probably can't use them on the road legally and they cost way too much money. I bet Fab Rats can make their own Matt - Tracks :)

Leslie Robinson11 days ago

My thought was to revisit this channel after I unsubscribed to see if there was any worthwhile content. I will remain unsubscribed and move on.

Jim Ronchetto11 days ago

So, where was I when Jamie bought lunch??

vbddfy euuyt11 days ago

about the brake lines - we put in every line a stopcock , so when a line is leaking, you can switch it off

Heath Davis11 days ago

Great job guys!!! Love the channel!!

BleepinJeep11 days ago

Wow guys, that is amazing! It’s crazy how it looks like a Cherokee at this point. The sad rotisserie death had me laughing! Can’t wait to see this thing finished and on the trails!

Corvair Chris11 days ago

Matt, at the end you said "I just have to do the steering really quick" , is it going to have "Quick Steering"? Seems like Quick steering might be desirable on a recovery rig when you get into tight spaces.

mudd Snow11 days ago

Opps Driving the school bus w/o a seat belt. shame. like the trailer w/o safety chains or being crossed for safety sake.. guys are slipping..

Jim Webb11 days ago

Will this be licensed for street use or will it be trailered to recovery jobs? Anything special need to be done to get it certified for road use?

Phil H.11 days ago

I'm not in the recovery business, but it seems to me, if you can't afford to give away more than 1 shirt, then you probably aren't charging enough.

ezbdaniels11 days ago

Man this thing has came a long way... it’s gonna be so sweet 😍

1ARM_6511 days ago

I hope you didn't pay for that "rattle trap" stuff. It's so incredibly over priced! Just get the exact same thing at Home Depot for 1/10th the price.

Pain11 days ago

This was on a plaque mounted on the dash of a 1941 willys jeep I grew up on. (Das machine is nicht fur gefingerpoken und mittengrabben. Ist easy schnappen der springenwerk, blowenfusen und corkenpoppen mit spitzensparken. Ist nicht fur gewerken by das dummkopfen. Das rubbernecken sightseeren keepen hands in das pockets. Relaxen und vatch das blinkenlights!!! )

Ed Barrientos11 days ago

I find even more ads on the newer vids compared to the older ones. Two maybe three would be okay, but 4 + in a 18 minute video is pushing it. You have good content but whiling to un-subscribe to avoid ads.

pitbullgator11 days ago

Looking good 🇺🇸🇺🇸🇺🇸🏁🏁🏁🤠

Joseph Burkhalter11 days ago

Are you putting a lot of bucks onto something that won’t be big enough or high enough or strong enough for tough recovery work.? Like why nor rebuild g an old Ford 350. Something already big, and bad. JoeB

PDQ Painters12 days ago

What I wanna know is who are the 233 negative yahoo's! :)

NitroNoriFan12 days ago

That rotisserie has been a brilliant aid in the birth of this awesome truck 😎

João Luiz Loureiro12 days ago

Very beatiful

tomarken Murrell12 days ago

Can't wait to see what kind of flex you get our of it great progress 👏

Detector Aid12 days ago

Is the sticky heat shield water proof?

Ryan M12 days ago

So rudy is dual citizenship but mat isnt but he said matts his dad a few times? Im confused, i have seen most of the vids for about 6 months now but im lost? Somome clarify please

Joe Malovich12 days ago

wen hop?

Rome Rides12 days ago

its amazing, you designed and built a vehicle from parts and knowledge. i can't wait to see this thing doing recoveries.

roshie brothers12 days ago

You don’t know your in the good times till it’s over

Ryan Edwards12 days ago

looking good bros

Dj Heinze12 days ago

Have you guys ate at the Pigs Ear in Hurricane.. love there food.

Bricknose Powerstroke12 days ago

That rattle trap is good stuff man! I got 3 layers on the inside of my firewall, and the rest of the cab in 1 layer! Definitely makes a difference!

Joe Campa12 days ago

That sound deadening material goes on the inside.

Bob Hob12 days ago

"lets get the wagon done by 2021"

Eric12 days ago

I may have someone build just the body and wiring of a classic c10 or I'm in between that or like an 02' model camera and then throw the motor, trans, axels and all that jazz in myself. If it's built correctly there should be no issue getting my LS3 in there and my $2,000 focal system with a little customizing I think it'll all fit.

Alan Sarrol12 days ago

No masks yikes

pbodymathis12 days ago

Are y'all building a "Corvair Tank"?

BANANA BOAT976312 days ago

mekanik

Lucky-Rowe12 days ago

How exciting! This has been great fun watching this winter. To bad I wasn't out in the shop working on my own stuff...LOL

bozus812 days ago

Guess you guys don’t think you have to follow Utah’s mask mandate.

Harry Harpoon12 days ago

Is it a Corvair station wagon that's lifted to be a truck with truck suspension? Corvair trucks don't exist, right?

Mr Gagarin12 days ago

Why not portal axels?

Jesse Barraza12 days ago

Lookin good

torinobob12 days ago

Had to watch this one again. I'm a Ford guy and not an off road guy, but I am loving this build. Can't wait to see her put to work and/or play.

Kenny A12 days ago

Ooh man this truck is so nice! Love watch the videos!!

paul kravitz12 days ago

Omg Matt head of the Bolt goes out and the nut goes on the inside on the four link bars !,,,,,

jdear9712 days ago

Blood, sweat, tears and time, lost sleep and a pretty good pile of money. Anyone could do this.

paul kravitz12 days ago

Well at least the bus is the right color.

MaybeSo MaybeNot12 days ago

Ha... I just flared the same brake line TWICE without putting the fitting on first the other day.

Nadnerb Yellah12 days ago

wow that is looking great sitting on the wheels keep up the great work

Komer West12 days ago

You need Edd out in the shop with a weather forecast.

Daniel Randolph12 days ago

Matt its coming togather yal stay ssfe ! Daniel from central Mississippi

Stephen Poe12 days ago

Looking Good !

ClassicAutoRestoration12 days ago

Going to be a beast !!!!!!!!!

Robbie Hampton12 days ago

I really enjoying watching this build, it is somewhat of a lost art in this day and age

Dee Gee12 days ago

5:31 WTH?!?!?! *FULL SCREEN*

Mike Sandberg12 days ago

The Corvair build looks great. I really enjoy watching you guys build stuff. it is pretty fun

Grow Roots Landscape13 days ago

Nice pumpkin. Anybody on project cost?

CLC III13 days ago

Hoping you are putting beadlocks on to begin with. Also accessory cooling system.

CLC III13 days ago

Like the jack-o-lantern pumpkin.

M GH13 days ago

👏👏👏👏👏👏👍

LOWVSN13 days ago

Watching this from scratch was amazing how far you guys have came 🔥

Dave Christel13 days ago

Looking good! Love the bus ride too 😂

brian meattey13 days ago

Can't wait to see it finished and running ..great job ya all godbless and stay safe

Garden Railroading Join The Fun13 days ago

WOW, She is looking beautiful!

Steve Botkin13 days ago

I absolutely love the Corvair build and have been following since the beginning. Congrats on getting it to this point.

Nancy Deurell13 days ago

So much fun watching this build!

Craig J13 days ago

Really nice build.

Wrenchettes13 days ago

man its looking great! hope i can build something like this in the near future.

Dan Moore13 days ago

In the early 70's, I rode to school in mom's '62 Lakewood wagon (when it would start). When she could finally afford a new car she gave the old 'Vair to the neighbor that had kept it together with duct tape and bailing wire. He cut the body off, welded a crude cage in place and turned the kids loose in it. This thing is beautiful.

Qanon Boom71813 days ago

Don'tt rescue Biden voters